Go!
Menu
UL 325 2016
EMX Inc UL 325 2016
Miller Edge UL 325 2016
Loops & Detectors
BD Loops Preformed Loops
Direct Burial
Saw Cut
BEA Inc
Diablo Controls Inc
Doorking
EMX Inc
NorthStar
Reno A&E
Loop Supplies
Gate Operators
Gate Operator Manuals
Doorking
Parking Control / Barrier Gates
Swing Automatic Gate Operators
Slide Automatic Gate Operators
Liftmaster
NICE Apollo
OSCO/Linear/GTO Inc
Parking Control / Barrier Gates
Slide Gate Operators
Swing Gate Operators
Powermaster
Viking Access
Gate Operator Replacement Parts
Linear/OSCO
Gate Operator Controls
Albano
Control Stations and Key Switches
Key Switches
Push Buttons and Control Stations
Doorking
Access Control
Telephone Entry
EMX Inc
Linear
Transmitters and Receivers
Miller Edge
Omron
Carefree Security
Automatic Door Controls
BEA Inc
SENSORS
ELECTROMAGNETIC LOCKS
ELECTRIC STRIKES
SECURITY BUTTONS
PUSH PLATES
TOUCHLESS SENSORS
LOGIC MODULES
EMX Inc
Toggle navigation
DoorandGateMoving.com
UL 325 2016
EMX Inc UL 325 2016
Miller Edge UL 325 2016
Loops & Detectors
BD Loops Preformed Loops
Direct Burial
Saw Cut
BEA Inc
Diablo Controls Inc
Doorking
EMX Inc
NorthStar
Reno A&E
Loop Supplies
Gate Operators
Gate Operator Manuals
Doorking
Parking Control / Barrier Gates
Swing Automatic Gate Operators
Slide Automatic Gate Operators
Liftmaster
NICE Apollo
OSCO/Linear/GTO Inc
Parking Control / Barrier Gates
Slide Gate Operators
Swing Gate Operators
Powermaster
Viking Access
Gate Operator Replacement Parts
Linear/OSCO
Gate Operator Controls
Albano
Control Stations and Key Switches
Key Switches
Push Buttons and Control Stations
Doorking
Access Control
Telephone Entry
EMX Inc
Linear
Transmitters and Receivers
Miller Edge
Omron
Carefree Security
Automatic Door Controls
BEA Inc
SENSORS
ELECTROMAGNETIC LOCKS
ELECTRIC STRIKES
SECURITY BUTTONS
PUSH PLATES
TOUCHLESS SENSORS
LOGIC MODULES
EMX Inc
Home
>
Loops & Detectors
>
BD Loops Preformed Loops
>
Saw Cut
>
BD Loops SC 18-20 Preformed Saw-Cut Inductance Loop 4x5 or 3x6
Our Price:
$
105.00
Product Code:
SC-18-20
Qty:
Description
Technical Specs
Documentation
BD Loops 18-20 Preformed Saw-Cut Inductance Loop 4x5 or 3x6 20' Lead Wire
*For installation in asphalt or concrete 3/16 saw-cut grove
*16 AWG loop wire design for superior performance.
*Pre tested 3 ways with meg-ohm meter, inductance meter and live detector
*Optional Installation kit includes: Template block set, caulk string, pizza wheel, wedge tool, soap stone marker, custom tool bag.
*EZ installation instructions
*Built in backer rod and 3rd level of insulation to protect against failure.
*Pre-phased and color coded at factory for EZ hook-up
*No need to make 2nd saw-cut for lead-in. Lead-in and loop jacket same size.
*MADE IN THE U.S.A.
Recommended installation tips:
Works best with 3/16" saw-cut blade or wider ¼” blade width.
Learn about
air pockets and other issues caused by 1/8” grooves.
Use the
Saw-Cut Layout Kit
to quickly lay out the cutting pattern.
Use a loop sealant
NOT A CRACK FILLER
to seal the groove.
Loop should be installed black side up
to ensure phasing direction matches. Due to the wire’s wedge shape
it is also easier to push the loop in with the black side up.
(Red always down)
Use a “V-Cut” for the yoke to simplify your installation. Learn more here!
Align loop over saw-cut groove before
insertion into the groove will prevent having to pull up and
realign a “tight-fitting” loop.
Sprinkling sand over the sealant
will create a barrier between the sealant and car ties and allow you to open the lane quicker.
We have a complete article about installation tips and tricks for saw-cut loops here.
The entire loop including the lead-in fits within a 3/16” saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
Every BD Loops Saw-Cut loop comes with a 3/16” sealant tip, which allows the installer to seal the loop in one pass from the bottom up. No more waiting for sealant to seep to the bottom of the groove and applying multiple coats.
Not at all! As long as you don’t make the saw pattern larger than the loop size (you can never make a preformed loop any larger) our loop will fit every time. We designed our Saw-Cut loops to be able to take up excess loop in the lead-in run, which makes the loop smaller.
Related Items
BD Loops SC 40-50 Preformed Saw-Cut Inductance Loop 6x14
BD Loops SC 40-100 Preformed Saw-Cut Inductance Loop 6x14
BD Loops SC 52-50 Preformed Saw-Cut Inductance Loop 6x20
BD Loops SC 36-50 Preformed Saw-Cut Inductance Loop 6x12
Our Price:
$132.00
Our Price:
$161.00
Our Price:
$161.00
Our Price:
$139.00
BD Loops SC 44-20 Preformed Saw-Cut Inductance Loop 6x16
BD Loops SC 52-20 Preformed Saw-Cut Inductance Loop 6x20
BD Loops SC 32-100 Preformed Saw-Cut Inductance Loop 4x12 or 6x10
BD Loops SC 44-50 Preformed Saw-Cut Inductance Loop 6x16
Our Price:
$142.00
Our Price:
$152.00
Our Price:
$143.00
Our Price:
$149.00
Share your knowledge of this product.
Be the first to write a review »
Company
Privacy Policy
Terms & Conditions
Product Index
Category List
Customers
FAQ/Help
Shipping & Deliveries
Returns & Exchanges
Account
My Account
Login
/
Register
Order Status
Connect
Facebook
Twitter
Copyright ©
2014
DoorandGateMoving.com. All Rights Reserved.
Built with
Volusion
.