Go!
Menu
UL 325 2016
EMX Inc UL 325 2016
Miller Edge UL 325 2016
Loops & Detectors
BD Loops Preformed Loops
Direct Burial
Saw Cut
BEA Inc
Diablo Controls Inc
Doorking
EMX Inc
NorthStar
Reno A&E
Loop Supplies
Gate Operators
Gate Operator Manuals
Doorking
Parking Control / Barrier Gates
Swing Automatic Gate Operators
Slide Automatic Gate Operators
Liftmaster
NICE Apollo
OSCO/Linear/GTO Inc
Parking Control / Barrier Gates
Slide Gate Operators
Swing Gate Operators
Powermaster
Viking Access
Gate Operator Replacement Parts
Linear/OSCO
Gate Operator Controls
Albano
Control Stations and Key Switches
Key Switches
Push Buttons and Control Stations
Doorking
Access Control
Telephone Entry
EMX Inc
Linear
Transmitters and Receivers
Miller Edge
Omron
Carefree Security
Automatic Door Controls
BEA Inc
SENSORS
ELECTROMAGNETIC LOCKS
ELECTRIC STRIKES
SECURITY BUTTONS
PUSH PLATES
TOUCHLESS SENSORS
LOGIC MODULES
EMX Inc
Toggle navigation
DoorandGateMoving.com
UL 325 2016
EMX Inc UL 325 2016
Miller Edge UL 325 2016
Loops & Detectors
BD Loops Preformed Loops
Direct Burial
Saw Cut
BEA Inc
Diablo Controls Inc
Doorking
EMX Inc
NorthStar
Reno A&E
Loop Supplies
Gate Operators
Gate Operator Manuals
Doorking
Parking Control / Barrier Gates
Swing Automatic Gate Operators
Slide Automatic Gate Operators
Liftmaster
NICE Apollo
OSCO/Linear/GTO Inc
Parking Control / Barrier Gates
Slide Gate Operators
Swing Gate Operators
Powermaster
Viking Access
Gate Operator Replacement Parts
Linear/OSCO
Gate Operator Controls
Albano
Control Stations and Key Switches
Key Switches
Push Buttons and Control Stations
Doorking
Access Control
Telephone Entry
EMX Inc
Linear
Transmitters and Receivers
Miller Edge
Omron
Carefree Security
Automatic Door Controls
BEA Inc
SENSORS
ELECTROMAGNETIC LOCKS
ELECTRIC STRIKES
SECURITY BUTTONS
PUSH PLATES
TOUCHLESS SENSORS
LOGIC MODULES
EMX Inc
Home
>
Loops & Detectors
>
Diablo Controls Inc
>
DIABLO DSP-7LP, Vehicle Detector
Our Price:
$
84.00
Product Code:
DSP-7LP
Qty:
Description
Technical Specs
DSP-7LP, Low Power Vehicle Detector
Overview
This low powered vehicle detector is perfect for solar powered applications!
Automatically adjusts its sensitivity level when used on different sized loops.
Covered by United States patent number US 7,132,959 “Non-Interfering Vehicle Detection”.
Features
Designed for solar power applications
Designed to be cross talk free between other loops
Plug ang Play
Small profile, making it perfect for most installations
Automatically compensates for loop and lead-in sizes
Switchless, self adapting to most common installations
Fail Safe Operation
Wide low-voltage operation
Application Notes
The DSP-7LP vehicle detector has been specifically designed for solar powered gate applications specifically for “fail safe” operations, such as on safety loops.
This detector will operate on any voltage from 10 to 30 volts AC or DC and draws approximately 1 milliampere with no vehicle on the loop.
This micro-sized detector will automatically adjust its sensitivity level when used on different loop sizes.
The detector loop inductance should be between 20 and 2000 microhenries.
The DSP-7LP detector has many of the same features as our standard DSP-7 but beats all competition for reliability, simplicity, and "no car" current consumption.
LED Indicators: The green Power LED blinks once per second to indicate the detector is operating and powered.
The red Detect LED will turn on when a vehicle is over the loop detection area.
Loop or Wire Failures: In the case of a loop circuit failure, the green LED flashes slowly (twice per second) for an open loop circuit failure.
The green LED will flash fast (10 times per second) to indicate a shorted loop circuit.
Fail Safe vs Fail Secure Info: A fail safe detector will output "detect" when the loop circuit is failed. This is always useful on a safety loop.
On the free exit loop this will keep the gate open until the situation is fixed. This is useful in applications where it is important to allow traffic flow to continue.
A fail secure detecor will never output "detect" when theloop circuit is failed. This will keep the gate closed. This is useful in high-secure areas or installations where containment is needed.
The DSP-7 is a fail safe detecor. Note: Never use a fail secure detector on a safety loop.
Power: This detector is powered with 10 to 30 volts AC or DC. Approximately 1 mA current.
The relay contacts are rated at 1 amp maximum.
Connector: Removable 7-pin terminal block.
Pin assignments (from left to right) are shown below:
1: Relay Normally Closed (NC) - contact opens for detect
2: Relay Common
3: Relay Normally Open (NO) - contact closes for detect
4: Power common
5: Power in (10 to 30 Volts AC or +DC)
6: Loop
7: Loop
Size: Height: 1.52" Width: 2.9" Depth: 1.56"
Operating Temperature: -35°F to 165°F (-37°C to 74°C)
Related Items
DIABLO DSP-20-11-LV, Dual Channel Vehicle Detector
DIABLO DLD-2, Directional Logic Device
DIABLO DSP-7, Vehicle Detector
DSP-50, Mini Loop Kit, 100'
Our Price:
$135.00
Our Price:
$79.81
Our Price:
$84.00
Our Price:
$179.00
DIABLO DSP-6LP
DIABLO DSP-40S, Plug-In Vehicle Detector
DIABLO DML-9LP, Low Power Vehicle Detector
DIABLO DSP-11-LV, Vehicle Detector
Our Price:
$84.00
Our Price:
$82.00
Our Price:
$89.00
Our Price:
$80.00
Share your knowledge of this product.
Be the first to write a review »
Company
Privacy Policy
Terms & Conditions
Product Index
Category List
Customers
FAQ/Help
Shipping & Deliveries
Returns & Exchanges
Account
My Account
Login
/
Register
Order Status
Connect
Facebook
Twitter
Copyright ©
2014
DoorandGateMoving.com. All Rights Reserved.
Built with
Volusion
.