|
|
|
|
Linear OSCO APeX Control Board
This is a replacement for APEX equipped operators manufactured before Jan12th 2016. If your operator was manufactured after January 12th 2016 your controller is the APEX II.
The OSCO APeX Controller is designed to work with all of Linear's OSCO
brand gate operators, and to replace current circuit boards with a new
design that is simpler and sleeker, while also integrating between the
gate operator and the access control system.
The new Linear OSCO APeX gate operator controller has been designed to
operate with Linear's OSCO brand of slide, swing gate operators and
barrier gate operators. It features on-board, low-voltage surge
protection for lightning protection on all inputs. It also has plug-in
loop detector capability (open, shadow/reset, reversing), as well as
pluggable, European-style field wiring connectors. There are LED
diagnostic lights and a built-in MegaCode radio that can program up to
40 handheld transmitters and two MGT gate edge transmitters, as well as
an integrated three-button station (momentary contact: Open, Close,
Stop). To simplify dual gate installation and operation, the APeX is
networkable, and allows accessory devices to be wired to either machine
in a dual gate application. The APeX controller also features
automatically resetting fuses, and there are not dipswitches or
potentiometers to set. It has a dual seven segment LED display for
programming and diagnostics. The APeX controller will also bring
soft-start/soft-stop capability to OSCO's line of commercial DC battery
backup gate operators. The APeX controller meets all UL 325
requirements and is CUL listed.
"The Linear OSCO APeX controller puts Linear/OSCO gate operators ahead
of the competition in terms of diagnostics, aesthetics, and
communications- features that offer a level of installer convenience and
flexibility unprecedented in the industry", said Randy Baker, Linear's
OSCO Product Line Manager "It easily integrates with both the gate
operators and the access control systems, and offers a new level of
simplicity for installers and users".
The Linear OSCO APeX is currently available on the OSCO slide gate
models (SLC, SLR and SLD) and swing gate models (SWC, SWR and SWD).
Throughout 2008, the APeX controller will be introduced to the rest of
the Linear/OSCO gate operator product line, including barrier gates
(BGU, BGU-D, BGUS and SG), variable speed industrial swing gate
operators (VS-GSWG), commercial/industrial slide gate operators (HSLG,
GSLG-A), and variable speed industrial slide gate operators (VS-GSLG).
Please check that your operator uses the APeX control board. Only used in newer models listed above
|
|
|
|
|
|
|